Applicable Products
QVR Pro Client 2.6.0 or later versions
Explanation
QVR Pro Client 2.6.0 and later supports remote access to QVR Server through myQNAPcloud Link. This allows you to view surveillance footage from any location without configuring VPN or port forwarding. Connection is authenticated through your QNAP ID.
Benefits of using myQNAPcloud Link for QVR Pro Client
Setting up remote access for your surveillance system used to require advanced IT knowledge. By using the myQNAPcloud Link service integrated into QVR Pro Client (v2.6.0+), you gain three major benefits:
- No network configuration required: myQNAPcloud Link eliminates the need for static IP, DDNS, or port forwarding setup.
- Cross-network connectivity: QVR Pro Client and QVR Server can be on different network segments. myQNAPcloud Link handles NAT traversal automatically.
- Encrypted connection: Traffic between QVR Pro Client and QVR Server is routed through myQNAPcloud Link with encryption.
Prerequisites for Remote Connection
Before you begin, ensure your system meets the following requirements:
- Client Software: QVR Pro Client version 2.6.0 or a newer release installed on your computer. (Note: 2.5.x and earlier versions do not support this feature.)
- Server Setup: The myQNAPcloud Link app must be installed, enabled, and showing a normal network status on your QNAP NAS.
- Account Access: A valid QNAP ID linked to your NAS with the necessary access permissions for QVR Server.
Procedure
Connecting to QVR Server Remotely
Follow these simple steps to establish your remote connection:
- Verify your NAS Cloud Status: Log in to your QNAP NAS operating system (QTS/QuTS hero) locally. Open the myQNAPcloud app and ensure the "myQNAPcloud Link" service is active.
- Launch QVR Pro Client: Open the QVR Pro Client software on your laptop.
- Add a New Server: On the main login screen, click the option to add a new server connection.
- Sign In with QNAP ID: Instead of entering an IP address, select the option to sign in using your QNAP ID and enter your account credentials.
- Select and Connect: Once authenticated, the client will automatically fetch a list of your linked NAS devices. Select your target QVR Server and click Connect.
You are now successfully connected to your QVR Server remotely. You can monitor your security cameras, view live feeds, and manage your surveillance system as if you were on the local network.
适用产品
QVR Pro 客户端 2.6.0 或更高版本
说明
QVR Pro 客户端 2.6.0 及更高版本支持通过 myQNAPcloud Link 远程访问 QVR Server。这使您无需配置 VPN 或端口转发即可从任何位置查看监控录像。连接通过您的 QNAP ID 进行身份验证。
使用 myQNAPcloud Link 对于 QVR Pro 客户端的好处
设置监控系统的远程访问曾经需要优异 IT 知识。通过使用集成在 QVR Pro 客户端 (v2.6.0+) 中的 myQNAPcloud Link 服务，您可以获得三个主要好处：
- 无需网络配置：myQNAPcloud Link 消除了静态 IP、DDNS 或端口转发设置的需要。
- 跨网络连接：QVR Pro 客户端和 QVR Server 可以位于不同的网络段。myQNAPcloud Link 自动处理 NAT 穿越。
- 加密连接：QVR Pro 客户端和 QVR Server 之间的流量通过 myQNAPcloud Link 进行加密传输。
远程连接的先决条件
在开始之前，请确保您的系统满足以下要求：
- 客户端软件：在您的计算机上安装 QVR Pro 客户端版本 2.6.0 或更新版本。（注意：2.5.x 及更早版本不支持此功能。）
- 服务器设置：必须在您的 QNAP NAS 上安装、启用并显示正常网络状态的 myQNAPcloud Link 应用程序。
- 账户访问：一个有效的 QNAP ID，已链接到您的 NAS，并具有 QVR Server 的必要访问权限。
步骤
远程连接到 QVR Server
按照以下简单步骤建立您的远程连接：
- 验证您的 NAS 云状态：本地登录到您的 QNAP NAS 操作系统（QTS/QuTS hero）。打开 myQNAPcloud 应用程序，并确保 "myQNAPcloud Link" 服务处于活动状态。
- 启动 QVR Pro 客户端：在您的笔记本电脑上打开 QVR Pro 客户端软件。
- 添加新服务器：在主登录屏幕上，点击选项以添加新的服务器连接。
- 使用 QNAP ID 登录：选择使用 QNAP ID 登录选项，而不是输入 IP 地址，并输入您的账户凭证。
- 选择并连接：认证后，客户端将自动获取您链接的 NAS 设备列表。选择您的目标 QVR Server 并点击连接。
您现在已成功远程连接到您的 QVR Server。您可以监控您的安全摄像头，查看实时视频，并管理您的监控系统，就像在本地网络上一样。
