本内容经过机器翻译。请参见机器翻译免责声明。

切换为英语

Which MIBs are supported by QSW managed switches?

QSW管理交换机支持哪些MIB？

最后修订日期: 2024-04-11

Applicable Products

Hardware

QSW-M3224-24T
QSW-M7308R-4X

Software

QSS Pro v4.0.0 and later

Overview

The Management Information Base (MIB) list provides definitions and information regarding the properties of managed resources and the services supported by QNAP switches. Object Identifiers (OIDs) serve as a unique naming convention within the Management Information Base (MIB) hierarchy, enabling the identification and access of specific objects.

RFC1213-MIB

MIB File	Object Identifier (OID)	Name	Description
RFC1213-MIB.mib	1.3.6.1.2.1.1	system	The system group includes information about the system on which the entity resides. Object in this group are useful for fault management and configuration management. For details, see IETF RFC 1213.

Name	OID	Access	Description
sysDescr	1.3.6.1.2.1.1.1	Read-only	A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software.
sysObjectID	1.3.6.1.2.1.1.2	Read-only	The vendor's authoritative identification of the network management subsystem contained in the entity.
sysUpTime	1.3.6.1.2.1.1.3	Read-only	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
sysContact	1.3.6.1.2.1.1.4	Read-write	The textual identification of the contact person for this managed node, together with information on how to contact this person.
sysName	1.3.6.1.2.1.1.5	Read-write	An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
sysLocation	1.3.6.1.2.1.1.6	Read-write	The physical location of this node.
sysServices	1.3.6.1.2.1.1.7	Read-only	A value which indicates the set of services that this entity primarily offers.

IF-MIB

MIB File	Object Identifier (OID)	Name	Description
IF-MIB.mib	1.3.6.1.2.1.2	interfaces	Interfaces group. The interfaces object group contains information about each interface on a network device. This group provides useful information on fault management, configuration management, performance management and accounting management.

Name	OID	Access	Description
ifNumber	1.3.6.1.2.1.2.1	Read-only	The number of network interfaces (regardless of their current state) pres.ent on this system.
ifTable	1.3.6.1.2.1.2.2	Not-accessible	A list of interface entries. The number of entries is given by the value of ifNumber.
ifEntry	1.3.6.1.2.1.2.2.1	Not-accessible	An entry containing management information applicable to a particular interface.
ifIndex	1.3.6.1.2.1.2.2.1.1	Read-only	A unique value for each interface.
ifDescr	1.3.6.1.2.1.2.2.1.2	Read-only	A textual string containing information about the interface.
ifType	1.3.6.1.2.1.2.2.1.3	Read-only	The type of interface, distinguished according to the physical/link protocol(s) immediately ‘below’ the network layer in the protocol stack.
ifSpeed	1.3.6.1.2.1.2.2.1.5	Read-only	An estimate of the interface's current bandwidth in bits per second.
ifPhysAddress	1.3.6.1.2.1.2.2.1.6	Read-only	The interface’s address at the protocol layer immediately 'below' the network layer in the protocol stack.
ifAdminStatus	1.3.6.1.2.1.2.2.1.7	Read-only	The desired state of the interface.
ifMtu	1.3.6.1.2.1.2.2.1.4	Read-only	The size of the largest datagram which can be sent/received on the interface, specified in octets.
ifOperStatus	1.3.6.1.2.1.2.2.1.8	Read-only	The current operational state of the interface.
ifLastChange	1.3.6.1.2.1.2.2.1.9	Read-only	The value of sysUpTime at the time the interface entered its current operational state.
ifInOctets	1.3.6.1.2.1.2.2.1.10	Read-only	The total number of octets received on the interface, including framing characters.
ifInUcastPkts	1.3.6.1.2.1.2.2.1.11	Read-only	The number of subnetwork-unicast packets delivered to a higher-layer protocol.
ifInNUcastPkts	1.3.6.1.2.1.2.2.1.12	Read-only	The number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
ifInDiscards	1.3.6.1.2.1.2.2.1.13	Read-only	The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
ifInErrors	1.3.6.1.2.1.2.2.1.14	Read-only	The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
ifInUnknownProtos	1.3.6.1.2.1.2.2.1.15	Read-only	The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
ifOutOctets	1.3.6.1.2.1.2.2.1.16	Read-only	The total number of octets transmitted out of the interface, including framing characters.
ifOutUcastPkts	1.3.6.1.2.1.2.2.1.17	Read-only	The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
ifOutNUcastPkts	1.3.6.1.2.1.2.2.1.18	Read-only	The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.
ifOutDiscards	1.3.6.1.2.1.2.2.1.19	Read-only	The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted.
ifMtu	1.3.6.1.2.1.2.2.1.20	Read-only	The size of the largest datagram which can be sent/received on the interface, specified in octets.
ifOutErrors	1.3.6.1.2.1.2.2.1.21	Read-only	The number of outbound packets that could not be transmitted because of errors.
ifOutQLen	1.3.6.1.2.1.2.2.1.21	Read-only	The length of the output packet queue (in packets).
ifSpecific	1.3.6.1.2.1.2.2.1.22	Read-only	A reference to MIB definitions specific to the particular media being used to realize the interface.

SNMPv2

MIB File	Object Identifier (OID)	Name	Description
SNMPv2-MIB.mib	1.3.6.1.6.3.1.1.4	snmpTrap	A collection of objects which allow the SNMP entity.

Name	OID	Access	Description
snmpTrapEnterprise	1.3.6.1.6.3.1.1.4.3	Read-only	The authoritative identification of the enterprise associated with the trap currently being sent.

START-MIB

MIB File	Object Identifier (OID)	Name	Description
START-MIB.mib IF-MIB.mib	1.3.6.1.6.3.1.1.5	snmpTraps	A collection of objects which allow the SNMP entity.

Name	OID	Access	Description
coldStart	1.3.6.1.6.3.1.1.5.1	Read-only	A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.
warmStart	1.3.6.1.6.3.1.1.5.2	Read-only	A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.
linkDown	1.3.6.1.6.3.1.1.5.3	Read-only	A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state).
linkUp	1.3.6.1.6.3.1.1.5.4	Read-only	A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state).

适用产品

硬件

QSW-M3224-24T
QSW-M7308R-4X

软件

QSS Pro v4.0.0 及更高版本

概述

管理信息库（MIB）列表提供了QNAP交换机支持的管理资源属性和服务的定义和信息。对象标识符（OID）在管理信息库（MIB）层次结构中用作唯一的命名约定，使得可以识别和访问特定对象。

RFC1213-MIB

MIB 文件	对象标识符（OID）	名称	描述
RFC1213-MIB.mib	1.3.6.1.2.1.1	system	系统组包括有关实体所在系统的信息。此组中的对象对于故障管理和配置管理很有用。详情请参见IETF RFC 1213。

名称	OID	访问	描述
sysDescr	1.3.6.1.2.1.1.1	只读	实体的文本描述。此值应包括系统硬件类型、软件操作系统和网络软件的全名和版本标识。
sysObjectID	1.3.6.1.2.1.1.2	只读	实体中包含的网络管理子系统的供应商权威标识。
sysUpTime	1.3.6.1.2.1.1.3	只读	自系统的网络管理部分最后一次重新初始化以来的时间（以百分之一秒为单位）。
sysContact	1.3.6.1.2.1.1.4	读写	此管理节点的联系人的文本标识，以及如何联系此人的信息。
sysName	1.3.6.1.2.1.1.5	读写	此管理节点的管理分配名称。按照惯例，这是节点的完全限定域名。
sysLocation	1.3.6.1.2.1.1.6	读写	此节点的物理位置。
sysServices	1.3.6.1.2.1.1.7	只读	表明此实体主要提供的服务集合的值。

IF-MIB

MIB 文件	对象标识符（OID）	名称	描述
IF-MIB.mib	1.3.6.1.2.1.2	接口	接口组。接口对象组包含有关网络设备上每个接口的信息。该组提供了关于故障管理、配置管理、性能管理和计费管理的有用信息。

名称	OID	访问	描述
ifNumber	1.3.6.1.2.1.2.1	只读	此系统上存在的网络接口数量（不论其当前状态如何）。
ifTable	1.3.6.1.2.1.2.2	不可访问	接口条目列表。条目的数量由ifNumber的值给出。
ifEntry	1.3.6.1.2.1.2.2.1	不可访问	包含适用于特定接口的管理信息的条目。
ifIndex	1.3.6.1.2.1.2.2.1.1	只读	每个接口的唯一值。
ifDescr	1.3.6.1.2.1.2.2.1.2	只读	包含有关接口的信息的文本字符串。
ifType	1.3.6.1.2.1.2.2.1.3	只读	根据协议栈中网络层“下方”立即的物理/链路协议来区分的接口类型。
ifSpeed	1.3.6.1.2.1.2.2.1.5	只读	接口当前带宽的估计值，以每秒比特数计。
ifPhysAddress	1.3.6.1.2.1.2.2.1.6	只读	位于协议栈中网络层“下面”一层的协议层的接口地址。
ifAdminStatus	1.3.6.1.2.1.2.2.1.7	只读	接口期望的状态。
ifMtu	1.3.6.1.2.1.2.2.1.4	只读	接口上可以发送/接收的最大数据报的大小，以八位字节为单位。
ifOperStatus	1.3.6.1.2.1.2.2.1.8	只读	接口当前的操作状态。
ifLastChange	1.3.6.1.2.1.2.2.1.9	只读	接口进入其当前操作状态时的sysUpTime的值。
ifInOctets	1.3.6.1.2.1.2.2.1.10	只读	接口上接收到的总八位字节数，包括帧字符。
ifInUcastPkts	1.3.6.1.2.1.2.2.1.11	只读	传递给高层协议的子网单播包的数量。
ifInNUcastPkts	1.3.6.1.2.1.2.2.1.12	只读	传递给高层协议的非单播（即子网广播或子网多播）包的数量。
ifInDiscards	1.3.6.1.2.1.2.2.1.13	只读	即使没有检测到错误以防止它们可交付给高层协议，也选择丢弃的入站数据包的数量。
ifInErrors	1.3.6.1.2.1.2.2.1.14	只读	由于包含错误而无法交付给高层协议的入站数据包的数量。
ifInUnknownProtos	1.3.6.1.2.1.2.2.1.15	只读	通过接口接收但由于未知或不支持的协议而被丢弃的数据包数量。
ifOutOctets	1.3.6.1.2.1.2.2.1.16	只读	从接口传出的总八位字节数，包括帧字符。
ifOutUcastPkts	1.3.6.1.2.1.2.2.1.17	只读	高层协议请求传输到子网单播地址的总数据包数，包括那些被丢弃或未发送的数据包。
ifOutNUcastPkts	1.3.6.1.2.1.2.2.1.18	只读	高层协议请求传输的总数据包数，这些数据包被寻址到这一子层的多播或广播地址，包括那些被丢弃或未发送的数据包。
ifOutDiscards	1.3.6.1.2.1.2.2.1.19	只读	选择丢弃的出站数据包的数量，尽管没有检测到错误以防止它们被传输。
ifMtu	1.3.6.1.2.1.2.2.1.20	只读	接口上可以发送/接收的最大数据报的大小，以八位字节为单位。
ifOutErrors	1.3.6.1.2.1.2.2.1.21	只读	由于错误而无法传输的出站数据包数量。
ifOutQLen	1.3.6.1.2.1.2.2.1.21	只读	输出数据包队列的长度（以数据包为单位）。
ifSpecific	1.3.6.1.2.1.2.2.1.22	只读	用于实现接口的特定媒体的MIB定义的引用。

SNMPv2

MIB文件	对象标识符 (OID)	名称	描述
SNMPv2-MIB.mib	1.3.6.1.6.3.1.1.4	snmpTrap	允许SNMP实体的对象集合。

名称	OID	访问	描述
snmpTrapEnterprise	1.3.6.1.6.3.1.1.4.3	只读	当前发送的陷阱所关联企业的权威标识。

START-MIB

MIB文件	对象标识符 (OID)	名称	描述
START-MIB.mib IF-MIB.mib	1.3.6.1.6.3.1.1.5	snmpTraps	允许SNMP实体的对象集合。

名称	OID	访问	描述
coldStart	1.3.6.1.6.3.1.1.5.1	只读	coldStart陷阱表示支持通知发起应用程序的SNMP实体正在重新初始化自身，并且其配置可能已被更改。
warmStart	1.3.6.1.6.3.1.1.5.2	只读	warmStart陷阱表示支持通知发起应用程序的SNMP实体正在重新初始化自身，但其配置未被更改。
linkDown	1.3.6.1.6.3.1.1.5.3	只读	linkDown陷阱表示作为代理角色的SNMP实体检测到其通信链接之一的ifOperStatus对象即将从其他状态（但不是从notPresent状态）进入down状态。
linkUp	1.3.6.1.6.3.1.1.5.4	只读	linkUp陷阱表示作为代理角色的SNMP实体检测到其通信链接之一的ifOperStatus对象已经离开down状态并转换到其他状态（但不是转换到notPresent状态）。

这篇文章有帮助吗？

是否

请告诉我们如何改进这篇文章：

这篇文章缺了重点讯息
这篇文章的解决方案没有用
这篇文章太过复杂
这篇文章包含了不正确的讯息
这篇文章的信息已过时

如果您想提供其他意见，请于下方输入。

Which MIBs are supported by QSW managed switches?

QSW管理交换机支持哪些MIB？

Applicable Products

Hardware

Software

Overview

RFC1213-MIB

IF-MIB

SNMPv2

START-MIB

适用产品

硬件

软件

概述

RFC1213-MIB

IF-MIB

SNMPv2

START-MIB

在线客服

售前 & 技术在线时间

项目咨询在线时间