Applicable Products
- QuTS hero h5.3.0 or later
- High Availability Manager
Answer
In a high-availability (HA) environment, you can configure scheduled shutdowns using the Power Schedule feature just like in standalone mode. The system will shut down both nodes simultaneously according to the configured schedule.
Instructions
- Log in to the active node.
Note
Scheduled shutdowns can only be configured from the active node and will apply to both nodes of the cluster.
- Go to Control Panel > System > Power > Power Schedule.
- Select Enable schedule.
- Click Add.
The Add Power Schedule window opens. - Configure and add the schedule.
- Next to Power action, select Shutdown.
- Next to Schedule, select the desired frequency.
- Next to Start time, specify the shutdown time.
- Click Apply.
The Add Power Schedule window closes. The system adds the schedule.
- Click Apply.
The system enables the shutdown schedule.
Both nodes in the HA cluster will shut down according to the configured schedule.
Note
- Make sure no critical tasks are running during the scheduled shutdown time. We recommend configuring shutdowns during low-peak hours.
- We recommend testing a shutdown first during maintenance hours.
Further Reading
How do I shut down both the active and passive nodes in an HA cluster?
适用产品
- QuTS hero h5.3.0 or later
- High Availability Manager
答案
在高可用性 (HA) 环境中，您可以像在独立模式下一样配置计划关机，使用电源计划功能。系统将根据配置的计划同时关闭两个节点。
说明
- 登录到活动节点。
注意
计划关机只能从活动节点配置，并将应用于群集的两个节点。
- 前往控制台 > 系统 > 电源 > 电源计划。
- 选择启用计划。
- 点击添加。
打开添加电源计划窗口。 - 配置并添加计划。
- 在电源操作旁边，选择关机。
- 在计划旁边，选择所需的频率。
- 在开始时间旁边，指定关机时间。
- 点击应用。
关闭添加电源计划窗口。系统添加了计划。
- 点击应用。
系统启用关机计划。
HA 群集中的两个节点将根据配置的计划关闭。
注意
- 确保在计划关机时间内没有关键任务正在运行。我们建议在低峰时段配置关机。
- 我们建议首先在维护时段测试关机。
进一步阅读
如何关闭HA 群集中的活动和被动节点？
