How to confirm RAID 10 pairs from GUI or dumplog
最后修订日期:
2022-06-24
Applied models:
-
All NAS Series
Applied Firmware:
-
All QTS Firmware Versions
Unfortunately pairs are not clearly displayed in the web GUI or in the dump logs. To verify the pair you need to know that the QNAP RAID 10 are 2 x RAID 1 stripped in a RAID 0.
Each pair is a pair of RAID 1. This information can be verified in the md_checker output, the first and second position is one pair and the third and the fourth position in the md_checker is the another RAID 1 and the second pair.
需要进一步协助，欢迎前往官方社区发帖，与其他用户及 QNAP 专家交流。 前往 QNAP 官方社区
